REAR SEAT ASSEMBLY(for Smart Cab) INSTALLATION

PROCEDURE

1. Click here

   INSTALL REAR SEAT CUSHION LOCK HOOK

   Note:
   

   • Perform the following only when replacing the rear seat cushion lock hook.

   • Do not reuse the rear seat cushion lock hook after removing it.

   Tip:

   Use the same procedure for the opposite side.

   
   
   1. 

      Attach the claw to install a new rear seat cushion lock hook.

2. Click here

   INSTALL REAR SEAT HEADREST ASSEMBLY

   Tip:

   Use the same procedure for the opposite side.

   
   
   1. 

      Install in this Direction

      Attach the hook.

   2. 

      Temporarily install the 3 bolts.

   3. Tighten the bolts in the order shown in the illustration to install rear seat headrest assembly.

      19.5 N*m

      199 kgf*cm

      14 ft.*lbf

3. Click here

   INSTALL BACK PANEL TRIM

   Click here

4. Click here

   INSTALL REAR SEAT CUSHION ASSEMBLY

   Tip:

   Use the same procedure for the opposite side.

   
   
   1. 

      Install in this Direction

      Push as shown in the illustration to attach the guide to install the rear seat cushion assembly.

   2. 

      Install in this Direction

      Push as shown in the illustration to attach the hook to install the rear seat cushion assembly.