REAR SEAT ASSEMBLY(for Smart Cab) REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT CUSHION ASSEMBLY

    Tech Tips

    Use the same procedure for the opposite side.


    1. B00275ZC01
      *1 Lever
      B0069FO Remove in this Direction

      Operate the lever of the rear seat cushion lock hook and detach the hook.

    2. B00263BC01
      B0069FO Remove in this Direction

      Pull up as shown in the illustration to detach the hook and remove the rear seat cushion assembly.

  2. REMOVE BACK PANEL TRIM

    Click here

  3. REMOVE REAR SEAT HEADREST ASSEMBLY

    Tech Tips

    Use the same procedure for the opposite side.


    1. B0026AY

      Remove the 3 bolts.

    2. B0025XMC01
      B0069FO Remove in this Direction

      Detach the hook and remove the rear seat headrest assembly.

  4. REMOVE REAR SEAT CUSHION LOCK HOOK

    Note


    • Perform the following only when replacing the rear seat cushion lock hook.

    • Do not reuse the rear seat cushion lock hook after removing it.

    Tech Tips

    Use the same procedure for the opposite side.


    1. B0028EPC01
      *1 Protective Tape

      Using a screwdriver, detach the claw and remove the rear seat cushion lock hook.

      Tech Tips

      Tape the screwdriver tip before use.