FRONT SEAT ASSEMBLY(for Bench Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B0025TC

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

  • Replace any other damaged parts as necessary.

PROCEDURE


  1. INSTALL FRONT SEAT ASSEMBLY


    1. A01LF3T

      Place the front seat assembly in the vehicle, as shown in the illustration.

      Note

      Do not damage the front seat assembly, body exterior or interior parts.

    2. Temporarily install the 4 bolts.

    3. A01L8W2C03
      B0068HS Bolt
      B006964 Connector

      Install the 4 bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    4. Connect the connector.

  2. INSTALL FRONT SEAT REAR INNER TRACK COVER LH


    1. A01LFBM

      Attach the hook to install the front seat rear inner track cover LH.

  3. INSTALL FRONT SEAT REAR OUTER TRACK COVER LH


    1. A01LD5T

      Attach the hook to install the front seat rear outer track cover LH.