Click here

FRONT SEAT ASSEMBLY(for Bench Seat Type) REASSEMBLY

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

  • B0025TC

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

  • If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

  • Replace any other damaged parts as necessary.

Click here

PROCEDURE


  1. Click here

    INSTALL SEAT COVER WIRE


    1. A01SK8IN01

      Install the seat cover wire.

      Tip:

      • Wire 1000 mm (3.28 ft.) or longer and shaped wire are available as supplied parts.


      • For wire 1000 mm (3.28 ft.) or less in length, cut or shape 1000 mm (3.28 ft.) wire into the dimensions shown in the illustration.


      • Make sure to read the precautions before preparing the wire.

        Click here

      Table 1. Length:
      A 270 mm (10.63 in.)
      B 510 mm (16.73 ft.)
      A01SGX6
      Tip:

      The dimensions shown in the illustration are the lengths.

  2. Click here

    INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    Tip:

    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here


    • A01SK2JN01

      Align the seam allowance in a single direction as shown in the illustration.


    1. Set the separate type front seat cushion cover.

    2. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 7 new hog rings in the order indicated in the illustration.

      A01SKBDC01
      *1 Hog Ring Pliers
      *a Cutout
      Note:

      • Be careful not to damage the separate type front seat cushion cover.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      Tip:

      Install the hog rings at the cutouts if they are there.

  3. Click here

    INSTALL SEAT CUSHION COVER WITH PAD


    1. A01SG05C01
      B0069FO Install in this Direction (1)
      B0068NX Install in this Direction (2)

      Push in installation direction (1) shown in the illustration to temporarily install the seat cushion cover with pad.

    2. Push in the rear end of the seat cushion cover with pad in installation direction (2) shown in the illustration.

    3. A01L8RH

      While rotating in the attach the J hook to install the seatback cover with pad.

    4. Connect the 2 straps of the separate type front seat cushion cover for the front seat cushion frame sub-assembly LH.

    5. Attach the connector clamp.

    6. Connect the connector.

  4. Click here

    INSTALL SEAT COVER WIRE


    1. A01SHVDN01

      Install the seat cover wire.

      Tip:

      • Wire 1000 mm (3.28 ft.) or longer and shaped wire are available as supplied parts.


      • For wire 1000 mm (3.28 ft.) or less in length, cut or shape 1000 mm (3.28 ft.) wire into the dimensions shown in the illustration.


      • Make sure to read the precautions before preparing the wire.

        Click here

      Table 2. Length:
      A 150 mm (5.91 in.)
      B 270 mm (10.63 ft.)
      A01SGX6
      Tip:

      The dimensions shown in the illustration are the lengths.

  5. Click here

    INSTALL SEPARATE TYPE FRONT SEATBACK COVER

    Tip:

    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here


    • A01SIGEC01

      Align the seam allowance in a single direction as shown in the illustration.


    1. Set the separate type front seatback cover.

    2. A01SJW4C01
      *1 Hog Ring Pliers
      *a Cutout

      Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad LH with 4 new hog rings in the order indicated in the illustration.

      Note:

      • Be careful not to damage the separate type front seatback cover.


      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.

      Tip:

      Install the hog rings at the cutouts if they are there.

  6. Click here

    INSTALL SEATBACK COVER WITH PAD


    1. A01SIJ1C01
      B0069FO Install in this Direction (1)
      B0068NX Install in this Direction (2)

      Push in installation direction (1) shown in the illustration to temporarily install the seatback cover with pad.

    2. Push in the rear end of the seatback cover with pad in installation direction (2) shown in the illustration.

    3. A01LCJK

      Attach the J hook to install the seatback cover with pad.

    4. A01LD2I

      Install the 4 bolts and front seatback assembly.

      42 N*m 428 kgf*cm 31 ft.*lbf
  7. Click here

    INSTALL FRONT SEAT INNER CUSHION SHIELD LH


    1. A01SJC2C01
      B0069FO Install in this Direction (1)
      B0068NX Install in this Direction (2)

      Push in installation direction (1) shown in the illustration to attach the claw.

    2. Push in installation direction (2) shown in the illustration to attach the claw and install the front seat inner cushion shield LH.

  8. Click here

    INSTALL FRONT SEAT CUSHION SHIELD LH


    1. A01SG8EC01
      B0069FO Install in this Direction (1)
      B0068NX Install in this Direction (2)

      Push in installation direction (1) shown in the illustration to attach the claw.

    2. Push in installation direction (2) shown in the illustration to attach the guide and install the front seat cushion shield LH.

  9. Click here

    INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01LC27

      Install the screw and reclining adjuster release handle LH.