SEAT HEATER SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT HEATER SWITCH


    1. A01LAF9C02
      *a

      Component without harness connected

      (Seat Heater Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance (LH Seat)
      Tester Connection Switch Condition Specified Condition
      5 (IG) - 6 (LH) LOCK Below 1 Ω
      FREE 10 kΩ or higher
      Standard Resistance (RH Seat)
      Tester Connection Switch Condition Specified Condition
      4 (IG) - 3 (RH) LOCK Below 1 Ω
      FREE 10 kΩ or higher

      If the result is not as specified, replace the seat heater switch.