Click here

PRE-CRASH SAFETY SYSTEM WARNING BUZZER(for LHD) INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT SKID CONTROL BUZZER


    1. Disconnect the skid control buzzer assembly connector.

    2. Check the connector and terminals for deformation and corrosion.

      OK
      No deformation or corrosion.
    3. B0024T9C08
      *a

      Component without harness connected

      (Skid Control Buzzer)

      Apply battery voltage and check the operation of the skid control buzzer according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2(IG1)

      Battery negative (-) → Terminal 1(BZ)

      		 Skid control buzzer sounds

      If the result is not as specified, replace the skid control buzzer.