CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
INSTALL TELLTALE LIGHT ASSEMBLY
Attach the 2 claws to install the telltale light assembly.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY
INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
PERFORM DIAGNOSTIC SYSTEM CHECK
for Type A:
for Type B:
CHECK SRS WARNING LIGHT
for Type A:
for Type B: