AIRBAG CUT-OFF SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. Attach the 2 claws to install the airbag cut off switch cylinder sub-assembly.

  2. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  3. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  8. PERFORM DIAGNOSTIC SYSTEM CHECK

    for Type A:

    Click here

    for Type B:

    Click here

    for Type C:

    Click here

  9. CHECK SRS WARNING LIGHT

    for Type A:

    Click here

    for Type B:

    Click here

    for Type C:

    Click here