FRONT SEAT SIDE AIRBAG ASSEMBLY(for Manual Seat) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)

   
   

   1. Perform a diagnostic system check.

      for Type B:

      Click here

      for Type C:

      Click here

   2. Visually check for defects with the front seat airbag assemblies installed on the vehicle.

      
      

      1. The defects are as follows:

         
         

         • Cuts on the front seatback assembly around the front seat airbag assemblies

         • Small cracks on the front seatback assembly around the front seat airbag assemblies

         • Significant discoloration on the front seatback assembly around the front seat airbag assemblies

         OK
         No defects are found.

         Tech Tips

         If any of the defects is found, replace the separate type front seatback cover or separate type front seatback pad with a new one.

2. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

   
   

   1. Perform a diagnostic system check.

      for Type B:

      Click here

      for Type C:

      Click here

   2. Visually check for defects with the front seat airbag assemblies removed from the vehicle.

      
      

      1. The defects are as follows:

         
         

         • Make sure that there are no broken or frayed threads, or scratches on the surface of the base fabric of the front seat airbag assemblies

         • Marks from being dropped

         • Deformation on the installation part of the front seat airbag assemblies

         • Cracks or other damage to the wire harness or connector

         OK
         No defects are found.

         Tech Tips

         If any of the defects is found, replace the front seat airbag assembly with a new one.