CAUTION / NOTICE / HINT
Use these procedures to troubleshoot the airbag system.
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| Result | ||
|---|---|---|
|
INSPECT BATTERY VOLTAGE
Measure the battery voltage.
| Standard voltage |
|---|
| 11 to 14 V |
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| Result | ||
|---|---|---|
|
CHECK CAN COMMUNICATION SYSTEM*
Check for DTCs.
for LHD without Central Gateway ECU:Click here
for RHD without Central Gateway ECU:Click here
| Result | |||
|---|---|---|---|
|
GO TO CAN COMMUNICATION SYSTEM for LHD without Central Gateway ECU:Click here
GO TO CAN COMMUNICATION SYSTEM for RHD without Central Gateway ECU:Click here
SRS WARNING LIGHT CHECK
| Result | ||
|---|---|---|
|
CHECK DTC (Present and Past DTCs)*
Check for DTCs.
| Result | |||
|---|---|---|---|
|
GO TO PROBLEM SYMPTOMS TABLEClick here
DIAGNOSTIC TROUBLE CODE CHART
Diagnostic Trouble Code Chart.
| Result | ||
|---|---|---|
|
CIRCUIT INSPECTION*
| Result | ||
|---|---|---|
|
REPAIR
| Result | ||
|---|---|---|
|
CLEAR DTC (Present and Past DTCs)*
Clear the DTCs.
| Result | ||
|---|---|---|
|
CHECK DTC (Present and Past DTCs)*
Check for DTCs.
| Result | |||
|---|---|---|---|
|
GO TO DIAGNOSTIC TROUBLE CODE CHARTClick here
CONFIRMATION TEST
| Result | ||
|---|---|---|
|
END