METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZE METER / GAUGE SYSTEM

1. Customizing with the GTS

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the ignition switch to ON.

   3. Turn the GTS on.

   4. Enter the following menus: Customize Setting / Warning or Display.

   5. Select the setting by referring to the table below.

      Note:

      Be sure to record the current value before customizing.

      
      
      1. Warning

         Tester Display	Description	Default	Setting	ECU
         Key Remind Volume	Function to change the volume of the key remind buzzer*1	Large	00:Large,10:Medium,01:Small	Combination meter assembly
         Key Remind Sound	Function to change the cycle of the key remind buzzer*1	Slow	00:Normal,01:Slow,10:Fast	Combination meter assembly
         Driver Side Seatbelt Warning Buzzer	Function to turn on/off the seat belt warning buzzer*2	ON	0:OFF,1:ON	Combination meter assembly
         Front Passenger Side Seatbelt Warning Buzzer	Function to turn on/off the seat belt warning buzzer*2	ON	0:OFF,1:ON	Combination meter assembly
         Rear Seatbelt Warning Buzzer	Function to turn on/off the seat belt warning buzzer*2, *3	ON	0:OFF,1:ON	Combination meter assembly
         Flasher Sound Volume Adjustment	Function to change the flasher sound volume	Medium	10:Large,00:Medium,01:Small	Combination meter assembly
         Flasher Sound Tone Setting	Function to change the flasher sound tone	Tone 1	00:Tone 1,01:Tone 2,10:Tone 3	Combination meter assembly
         Lane Change Flashing Times Setting	Function to change the lane change flashing time	3	000:OFF,001:3,010:4,011:5,100:6,101:7	Combination meter assembly

      2. 
         
      3. 
         
         10. 
             
         11. 
             
         12. 
             
         13. 
             
         14. 
             
         15. 
             
         16. 
             
         17. 
             
      
      

      • *1: w/o Entry and Start System

      • *2: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

      • *3: w/ Rear Seat Belt Warning System

      
      
      1. Display

         Tester Display	Description	Default	Setting	ECU
         ECO Drive Indicator Zone	Function to enable or disable the eco driving indicator zone display in the multi-information display*	ON	0:OFF,1:ON	Combination meter assembly
         ODO Display Time After IG OFF Setting	Function to change the ODO display time after the ignition switch is turned off	30s	00:30s,01:60s,10:600s,11:OFF	Combination meter assembly

      2. 
         
      3. 
         
         10. 
             
         11. 
             
      
      

      • *: except Segment Display Type

2. Customizing with the combination meter assembly (for TFT Display Type)

   
   

   1. Turn the ignition switch to ON.

   2. Enter the following menus: Settings.

   3. Select the setting by referring to the table below.

      Note:

      Be sure to record the current value before customizing.

      Table 1. Settings

      Combination Meter Assembly Display	Description	Default	Setting	ECU
      Language	Function to change the language on the display	English	English, German, French, Spanish, Italian, Russian, Turkish, Thai, Portuguese or Indonesian	Combination meter assembly
      Units	Function to change the units on the display	L/100 km	km/L, L/100 km	Combination meter assembly
      Eco Driving Indicator Light*	Function to activate/deactivate the ECO driving indicator light	ON	ON or OFF	Combination meter assembly
      Switch Settings	Function to change the screen assigned to the TOP button on the steering pad switch assembly	-	-	Combination meter assembly
      Drive Info 1	Function to change the item to be displayed on Drive Info 1	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset)	Current Fuel Economy (Bar Type) Current Fuel Economy (Value Type) Average Fuel Economy (After Reset) Average Fuel Economy (After Start) Average Fuel Economy (After Refuel) Average Speed (After Reset) Average Speed (After Start) Elapsed Time (After Reset) Elapsed Time (After Start) Distance (Range) Distance (After Start) Other (Blank)	Combination meter assembly
      Drive Info 2	Function to change the item to be displayed on Drive Info 2	Average Speed (After Reset) Distance (Range)	Current Fuel Economy (Bar Type) Average Fuel Economy (After Reset) Average Fuel Economy (After Start) Average Fuel Economy (After Refuel) Average Speed (After Reset) Average Speed (After Start) Elapsed Time (After Reset) Elapsed Time (After Start) Distance (Range) Distance (After Start) Other (Blank)	Combination meter assembly
      Pop-up Display	Function to change the interrupt display setting of each item	-	-	Combination meter assembly
      Color	Function to change the cursor color when selecting a displayed item	Clear Blue	Clear Blue, Clear Turquoise, Deep Orange or Radiant Orange	Combination meter assembly
      Initialize display	The setting items can be initialized	-	-	Combination meter assembly

      *: w/ Eco Drive Indicator Light

   4. Enter the following menus: Settings Tab /Settings / Eco Savings

   5. Select the setting by referring to the table below.

      Table 2. Eco Savings

      Combination Meter Assembly Display	Description	Default	Setting	ECU
      Gasoline Price	To select the gasoline price	*	$/gal. or $/L	Combination meter assembly
      Fuel Cons. Comparison	To select the fuel consumption unit	*	MPG or L/100km	Combination meter assembly
      ECO Savings	To select the eco savings display setting	Basic	Basic or Details	Combination meter assembly

      *: Changes according to the vehicle specification

3. Customizing with the combination meter assembly (for Dot Display Type)

   
   
   1. 

      *a	Example	-	-
      	Press and hold the DISP switch in the steering pad switch assembly		Briefly press the DISP switch in the steering pad switch assembly

      While on the "SETTINGS" screen of the multi-information display, pressing and holding the DISP switch in the steering pad switch assembly switches to customization mode.

      Combination Meter Assembly Display	Description	Default	Setting	ECU
      LANGUAGE	Function to change the language on the display	English	English, French, Spanish, Thai, Portuguese or Indonesian	Combination meter assembly
      UNIT	Function to change the units on the display	L/100 km	km/L, L/100 km	Combination meter assembly
      ECO indicator*	Function to activate/deactivate the ECO driving indicator light	ON	ON or OFF	Combination meter assembly

      *: w/ Eco Drive Indicator Light