PERSONAL LIGHT REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT ASSEMBLY (PERSONAL LIGHT)

    A01SHRTC01
    B0068AS Insert Moulding Remover D Here
    B0069FO Remove in this Direction

    1. Insert moulding remover D at the position shown in the illustration and pull as shown to detach the clip.

    2. A01SI86C01
      B0068AS Place Hands Here
      B0069FO Remove in this Direction

      Place your hands in the gap created during the above procedure and pull down to detach the clip as shown in the illustration.

    3. Disconnect the connector and remove the map light assembly (personal light).