Click here

ENGINE HOOD COURTESY SWITCH INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    INSTALL HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    1. B0068BU

      Apply MP grease to the sliding areas of the lock.

    2. B0068H2

      Attach the guide and connect the hood lock control cable.

    3. B00699QC01
      B0069FO Install in this Direction (1)
      B0068NX Install in this Direction (2)

      Move the hood lock assembly (engine hood courtesy switch) in the direction of the arrow shown in the illustration.

    4. B00698IC02
      B0068HS Bolt
      B006964 Connector

      Install the hood lock assembly (engine hood courtesy switch) with the 3 bolts.

      11 N*m 112 kgf*cm 8 ft.*lbf
      Tip:

      Tighten the bolts in the order shown in the illustration.

    5. Connect the connector.

  2. Click here

    INSTALL NO. 1 RADIATOR GRILLE RETAINER

    Click here

  3. Click here

    ADJUST HOOD SUB-ASSEMBLY

    Click here