ROOM LIGHT BULB REPLACEMENT

PROCEDURE

1. REMOVE DOME FUSE

   
   

   1. 

      Remove the dome fuse.

2. REMOVE NO. 1 ROOM LIGHT BULB

   
   

   1. for Double Cab, for Smart Cab:

      
      
      1. 

         *a	Protective Tape
         	Insert Thin-bladed Screwdriver Here
         	Remove in this Direction

         Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the No. 1 room light lens.

         Tech Tips

         Tape the thin-bladed screwdriver tip before use.

   2. for Single Cab:

      
      
      1. 

         *a	Protective Tape
         	Insert Thin-bladed Screwdriver Here
         	Remove in this Direction

         Insert a thin-bladed screwdriver at the position shown in the illustration, detach the claw and remove the map light lens.

         Tech Tips

         Tape the thin-bladed screwdriver tip before use.

   3. 

      Remove the No. 1 room light bulb.

3. INSTALL NO. 1 ROOM LIGHT BULB

   
   

   1. 

      Install the No. 1 room light bulb.

   2. for Double Cab, for Smart Cab:

      
      

      1. 

         Install in this Direction

         Attach the claw to install the No. 1 room light lens as shown in the illustration.

   3. for Single Cab:

      
      

      1. 

         Install in this Direction

         Attach the claw to install the map light lens as shown in the illustration.

4. INSTALL DOME FUSE

   
   

   1. 

      Install the dome fuse.