DOOR CONTROL BATTERY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL DOOR CONTROL BATTERY


    1. B0025COC02
      B0068HS Bolt
      B006964 Connector

      Connect the connector.

    2. Attach the hook to install the door control battery with the 2 bolts.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. CHECK SRS WARNING LIGHT (w/ Airbag System)

    for Type A:

    Click here

    for Type B:

    Click here

    for Type C:

    Click here