DOOR CONTROL BATTERY REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PRECAUTION (w/ Airbag System)

   CAUTION:
   

   Be sure to read Precaution thoroughly before servicing.

   for Type A:

   Click here

   for Type B:

   Click here

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

   Click here

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Airbag System)

   CAUTION:
   

   
   

   • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   • If the airbag deploys for any reason, it may cause a serious accident.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. Click here

   REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

4. Click here

   REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

5. Click here

   REMOVE DOOR CONTROL BATTERY

   
   
   1. 

      	Bolt
      	Connector

      Remove the 2 bolts.

   2. Detach the hook and remove the door control battery.

   3. Disconnect the connector.