WIRELESS DOOR LOCK BUZZER(for LHD) REMOVAL

PROCEDURE

1. REMOVE FRONT FENDER SPLASH SHIELD FRONT SEAL LH (for Steel Type Bumper)

   Click here

2. REMOVE WIRELESS DOOR LOCK BUZZER (for Steel Type Bumper)

   
   

   1. 

      Slide in this Direction

      Remove the 10 clips.

   2. Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.

   3. 

      Disconnect the connector.

   4. Using a clip remover, detach the clamp and remove the wireless door lock buzzer.

3. REMOVE WIRELESS DOOR LOCK BUZZER (for Resin Type Bumper)

   
   

   1. 

      *a	90°
      	Turn in this Direction

      Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.

   2. for 2WD Model:

      
      

      1. 

         	Screw
         	Clip
         	Slide in this Direction

         Remove the 3 screws.

      2. Remove the 9 clips.

      3. Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.

   3. for 4WD Model, for Prerunner Model:

      
      

      1. 

         	Screw
         	Clip
         	Slide in this Direction

         Remove the 3 screws.

      2. Remove the 11 clips.

      3. Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.

   4. 

      Disconnect the connector.

   5. Using a clip remover, detach the clamp and remove the wireless door lock buzzer.