DOOR CONTROL RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL DOOR CONTROL RECEIVER (w/o Entry and Start System)


    1. B0028U3C02
      B0068HS Nut
      B006964 Connector

      Connect the connector.

    2. Attach the guide to install the door control receiver with the nut.

  2. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Entry and Start System)


    1. B0028E6C02
      B0068HS Nut
      B006964 Connector

      Connect the connector.

    2. Attach the guide to install the smart door control receiver assembly with the nut.

  3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. KEY REGISTRATION (w/o Entry and Start System)

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. CHECK SRS WARNING LIGHT (w/ Airbag System)

    for Type A:

    Click here

    for Type B:

    Click here