UNLOCK WARNING SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY


    1. B0024YZC01
      B0069FO Install in this Direction

      Attach the claw to install the unlock warning switch assembly to the upper steering column with switch bracket assembly.

      Tech Tips

      Move the unlock warning switch assembly in the direction indicated by the arrow in the illustration to install it.

    2. Connect the connector.

  2. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY

    Click here

  3. INSTALL TRANSPONDER KEY COIL (w/ Engine Immobiliser System)

    Click here

  4. INSTALL UPPER STEERING COLUMN COVER

    Click here

  5. INSTALL LOWER STEERING COLUMN COVER

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here