KEY REMINDER WARNING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Combination Meter > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      +B Voltage Value Battery voltage

      Min.: 0 V

      Max.: 25.5 V

      		 11 to 14 V -
      Driver Side Door Driver door courtesy light switch signal CLOSE or OPEN

      CLOSE: Driver door closed

      OPEN: Driver door opened

      		 -
      Key Insert Unlock warning switch signal OFF or ON

      OFF: No key in ignition key cylinder

      ON: Key inserted

      		 -
      Key Remind Sound Condition of the key reminder sound adjustment Normal, Slow or Fast Customize setting displayed -
      Key Remind Volume Condition of the key reminder volume adjustment Large, Medium, or Small Customized value displayed -