CHECK POWER DOOR LOCK OPERATION
Check basic functions.
Check that all doors lock when the lock side of the door control switch is pressed.
Check that all doors unlock when the unlock side of the door control switch is pressed.
Check that all doors lock when the driver door key cylinder is turned to lock using the mechanical key.
Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.
Check the key lock-in prevention function (w/ Entry and Start System).
Note
In order to prevent the key from being locked in, the following inspection should be performed with the driver door window open.
Turn the ignition switch to ON.
With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is pressed.
With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.
With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.
Check the key lock-in prevention function (w/o Entry and Start System).
Note
In order to prevent the key from being locked-in, the following inspection should be performed with the driver door window open.
Insert the key into the ignition key cylinder.
With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is pressed.
With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.
With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.
Check the security function of the door lock control system.
Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle (Step 1).
Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the lock knob. Hold the outside handle of the driver door open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless door lock or entry lock operation.* Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
Tech Tips
Check that the security function of the door lock control system is canceled under the following conditions:
The driver door is unlocked using the key.
The engine is running at 550 rpm or more.
The unlock side of the door control switch (for manual operation) is pressed after the door lock knob is unlocked manually.
The doors are unlocked by wireless operation.
The doors are unlocked by entry operation.*
*: w/ Entry and Start System
Inspect the driver side key-linked door lock/unlock prohibition function.
With the ignition switch ON and the driver side seat belt fastened, check that the door lock/unlock functions do not operate when performing driver side door key-linked operation from outside the vehicle.
Check the illumination function.
Set the map light switch to the DOOR position.
With all the doors locked, check that all doors unlock when the driver side door lock key cylinder is turned to unlock using the key and that the map light turns on.
Check the speed-sensitive automatic door lock function (w/ Speed-sensitive Automatic Door Lock Function).
Tech Tips
The speed-sensitive automatic door lock function can be customized. Make sure that this function is ON before performing this.
When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors lock automatically.
Check the driver door-linked automatic door unlock function (w/ Speed-sensitive Automatic Door Lock Function).
Tech Tips
The driver door-linked automatic door unlock function can be customized. Make sure that this function is ON before performing this.
When the driver door is opened within approximately 10 seconds of the ignition switch being turned from ON to off, check that all doors unlock automatically.