GENERATOR(for 100A Type) REMOVAL

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click here

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. Click here

   REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE

   Click here

4. Click here

   REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

5. Click here

   REMOVE AIR CLEANER CASE SUB-ASSEMBLY

   Click here

6. Click here

   REMOVE FAN AND GENERATOR V BELT

   Click here

7. Click here

   REMOVE NO. 2 IDLER PULLEY ASSEMBLY

   
   

   1. Remove the bolt, 2 pulley plates, No. 2 idler pulley assembly and spacer.

8. Click here

   REMOVE GENERATOR ASSEMBLY

   
   

   1. Remove the nut and generator wire from terminal B.

   2. Disconnect the generator connector.

   3. Remove the 2 bolts and generator assembly.