GENERATOR(for 90A Type) INSTALLATION

PROCEDURE

1. Click here

   INSTALL GENERATOR ASSEMBLY

   
   

   1. Install the 2 generator brackets with the 2 bolts.

      8.4 N*m

      86 kgf*cm

      74 in.*lbf

   2. Install the generator assembly with the 2 bolts.

      43 N*m

      438 kgf*cm

      32 ft.*lbf

   3. Attach the 3 clamps and connect the wire harness.

   4. Connect the wire harness to terminal B with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   5. Install the terminal cap.

   6. Connect the generator connector and attach the clamp.

   7. Connect the intake air temperature sensor connector.

2. Click here

   INSTALL FAN AND GENERATOR V BELT

   Click here

3. Click here

   INSTALL NO. 4 AIR HOSE

   Click here

4. Click here

   INSTALL BATTERY TRAY

5. Click here

   INSTALL BATTERY

6. Click here

   INSTALL BATTERY CLAMP SUB-ASSEMBLY

   
   

   1. Install the battery clamp sub-assembly with the 2 nuts and 2 battery clamp bolts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

7. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here