GENERATOR(for 80A Type) REMOVAL

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click here

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. Click here

   REMOVE BATTERY CLAMP SUB-ASSEMBLY

   
   
   1. 

      Loosen the 2 nuts.

   2. Remove the 2 battery clamp bolts and battery clamp sub-assembly.

4. Click here

   REMOVE BATTERY

5. Click here

   REMOVE BATTERY TRAY

6. Click here

   REMOVE NO. 4 AIR HOSE

   Click here

7. Click here

   REMOVE FAN AND GENERATOR V BELT

   Click here

8. Click here

   REMOVE GENERATOR ASSEMBLY

   
   
   1. 

      Disconnect the intake air temperature sensor connector.

   2. Disconnect the generator connector and detach the clamp.

   3. Remove the terminal cap.

   4. Remove the nut and disconnect the wire harness from terminal B.

   5. 

      Detach the 3 clamps and disconnect the wire harness.

   6. 

      Remove the 2 bolts and generator assembly.

   7. 

      Remove the 2 bolts and 2 generator brackets.