DOWNHILL ASSIST CONTROL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL DOWNHILL ASSIST CONTROL SWITCH

   
   
   1. 

      Install in this Direction

      Attach the 2 claws to install the downhill assist control switch to the lower instrument cover sub-assembly.

   2. Connect the downhill assist control switch connector.

2. Click here

   INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

4. Click here

   INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

6. Click here

   INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

7. Click here

   INSTALL LOWER STEERING COLUMN COVER

   Click here

8. Click here

   INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

   Click here

9. Click here

   INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Cooler System)

   Click here

10. Click here

    INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

12. Click here

    CHECK SRS WARNING LIGHT

    Click here