REAR DIFFERENTIAL LOCK POSITION SWITCH(for DANA Made w/ Differential Lock) REASSEMBLY

Click here

PROCEDURE

1. Click here

   INSTALL NO. 1 TRANSFER INDICATOR SWITCH (REAR DIFFERENTIAL LOCK POSITION SWITCH)

   
   
   1. 

      Install a new No. 1 transfer indicator switch (rear differential lock position switch) with the bolt.

      12.5 N*m

      127 kgf*cm

      9 ft.*lbf

2. Click here

   INSTALL ELECTRONIC DIFFERENTIAL LOCK CASE SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL DIFFERENTIAL BEARING CAP

   Click here

4. Click here

   INSTALL WIRING HARNESS CONNECTOR

   Click here

5. Click here

   INSPECT TOTAL PRELOAD

   Click here

6. Click here

   INSPECT DIFFERENTIAL RING GEAR BACKLASH

   Click here