REAR DIFFERENTIAL LOCK POSITION SWITCH(for DANA Made w/ Differential Lock) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 TRANSFER INDICATOR SWITCH (REAR DIFFERENTIAL LOCK POSITION SWITCH)


    1. A01SEM4C01
      *a

      Component without harness connected

      (No. 1 Transfer Indicator Switch (Rear Differential Lock Position Switch))
      B0068HS ON
      B006964 OFF

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1(GND) - 2 (RLY2) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the No. 1 transfer indicator switch (rear differential lock position switch).