REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock) INSPECTION

PROCEDURE


  1. INSPECT DIFFERENTIAL LOCK COIL


    1. A01SDP8C01
      *a

      Component without harness connected

      (Differential Lock Coil)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (M2) - 2 (M1) Always 2.65 to 2.95 Ω

      If the result is not as specified, replace the differential lock coil.