TELEMATICS TRANSCEIVER INSTALLATION

PROCEDURE

1. INSTALL TELEMATICS TRANSCEIVER

   
   

   1. 

      Connect the connectors.

   2. Install the telematics transceiver with the screws.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

      Torque:

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

5. CHECK SRS WARNING LIGHT

   Click here