TRANSFER CASE FRONT OIL SEAL REPLACEMENT
PROCEDURE
-
DRAIN TRANSFER OIL
-
SUPPORT TRANSMISSION ASSEMBLY
-
for A750F: Click here
-
for AC60F:
-
with 1GR-FE: Click here
-
with 1GD-FTV, 2GD-FTV: Click here
-
with 2TR-FE: Click here
-
for R151F: Click here
-
for RC60F / RC61F: Click here
-
-
REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY
-
for A750F: Click here
-
for AC60F:
-
with 1GR-FE: Click here
-
with 1GD-FTV, 2GD-FTV: Click here
-
with 2TR-FE: Click here
-
for R151F: Click here
-
for RC60F / RC61F: Click here
-
-
REMOVE TRANSFER CASE LOWER PROTECTOR
-
REMOVE FRONT PROPELLER SHAFT ASSEMBLY
-
REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
-
REMOVE TRANSFER CASE OIL SEAL
-
*a Turn *b Hold Using SST, remove the transfer case oil seal.
- SST
- 09950-40011 ( 09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04031, 09957-04010, 09958-04011 )
Note
Apply a lubricant to the threads and end of SST.
-
-
INSTALL TRANSFER CASE OIL SEAL
-
Coat the lip of a new transfer case oil seal with MP grease.
-
Using SST and a hammer, install the transfer case oil seal until its metal ring contacts the case.
- SST
- 09710-30041 ( 09710-03221 )
- 09950-60010 ( 09951-00600, 09951-00650, 09952-06010 )
- 09950-70010 ( 09951-07150 )
-
-
INSTALL OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY
-
INSTALL FRONT PROPELLER SHAFT ASSEMBLY
-
INSTALL TRANSFER CASE LOWER PROTECTOR
-
INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY
-
for A750F: Click here
-
for AC60F:
-
with 1GR-FE: Click here
-
with 1GD-FTV, 2GD-FTV: Click here
-
with 2TR-FE: Click here
-
for R151F: Click here
-
for RC60F / RC61F: Click here
-
-
ADD TRANSFER OIL
-
CHECK FOR TRANSFER OIL LEAK