Click here

TRANSFER OIL ON-VEHICLE INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    CHECK TRANSFER OIL


    1. A01LCPWC01
      *1 Filler Plug

      Remove the filler plug and gasket.

    2. A01LACGC02
      *a 0 to 5.0 mm

      Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

      If the result is not as specified, add transfer oil.

      Oil grade
      Toyota Genuine Transfer Gear Oil LF or Equivalent
      Viscosity
      SAE 75W
      Note:

      Too much or too little oil will lead to transfer problems.

    3. When the oil level is too low, check for oil leakage.

    4. Install a new gasket to the filler plug, and then install the filler plug.

      37 N*m 377 kgf*cm 27 ft.*lbf