MANUAL TRANSMISSION OIL REPLACEMENT

PROCEDURE

1. Click here

   DRAIN MANUAL TRANSMISSION OIL

   
   

   1. Remove the manual transmission filler plug and gasket.

   2. Remove the drain plug sub-assembly and gasket and then drain the manual transmission oil.

   3. Install a new gasket and the drain plug sub-assembly.

      37 N*m

      377 kgf*cm

      27 ft.*lbf

2. Click here

   ADD MANUAL TRANSMISSION OIL

   
   
   1. 

      *a	0 to 5.0 mm (0 to 0.196 in.)

      Add manual transmission oil until the oil level is within 0 to 5 mm (0 to 0.196 in.) from the bottom of the manual transmission case plug opening.

      Oil grade	Oil viscosity	Standard capacity
      Manual transmission gear oil GL-3	SAE 75W-90	2.5 liters (2.6 US qts, 2.2 Imp. qts)

3. Click here

   INSPECT MANUAL TRANSMISSION OIL

   Click here