MANUAL TRANSMISSION OIL REPLACEMENT

PROCEDURE


  1. DRAIN MANUAL TRANSMISSION OIL


    1. Remove the manual transmission filler plug and gasket.

    2. Remove the drain plug sub-assembly and gasket and then drain the manual transmission oil.

    3. Install a new gasket and the drain plug sub-assembly.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. ADD MANUAL TRANSMISSION OIL


    1. A01SE7UC07
      *a 0 to 5.0 mm (0 to 0.196 in.)

      Add manual transmission oil until the oil level is within 0 to 5 mm (0 to 0.196 in.) from the bottom of the manual transmission case plug opening.

      Manual transmission oil
      Oil grade Oil viscosity Standard capacity
      Gear oil API GL-3 (GL-4) SAE 75W-90 2.7 liters (2.9 US qts, 2.4 Imp. qts)

  3. INSPECT MANUAL TRANSMISSION OIL

    Click here