CLUTCH RELEASE CYLINDER INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY


    1. Install the clutch release cylinder with the 2 bolts.

      Torque:
      11.8 N*m  { 120 kgf*cm, 9 ft.*lbf }

  2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE


    1. A01SIKOC01
      *A for TR Engine
      *B for GD and KD Engine
      *a Torque Wrench Fulcrum Length

      Using a union nut wrench, connect the clutch release cylinder to flexible hose tube.

      Torque:
      Specified tightening torque
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

  3. BLEED AIR FROM CLUTCH PIPE LINE

    Click here

  4. CHECK FOR CLUTCH FLUID LEAKAGE

    Tech Tips

    Check for leaks in the clutch system.

  5. CHECK FLUID LEVEL IN RESERVOIR

    Click here