AMPLIFIER ANTENNA REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

B00291E

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


    1. for Single Cab:

      Click here

    2. for Smart Cab:

      Click here

    3. for Double Cab:

      Click here

  4. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY


    1. A01W9XNC01
      B0069FO Remove in this Direction

      Disconnect the connector.

    2. Remove the nut.

    3. B0027TN

      Detach the claws and remove the No. 1 amplifier antenna assembly.