RADIO ANTENNA CORD REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

B00291E

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. w/o Navigation System:


      1. Disconnect the connector.

        B00280A

      2. Detach the clamps shown in the illustration.

      3. Remove the bolt and antenna cord sub-assembly.

    2. w/ Navigation System:


      1. Disconnect the connector.

        B0027NS

      2. Detach the clamps shown in the illustration.

      3. Remove the bolt and antenna cord sub-assembly.

  5. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. w/o Navigation System:


      1. Disconnect the connector.

        B0027A4

      2. Detach the clamps shown in the illustration.

      3. Remove the bolt and antenna cord sub-assembly.

    2. w/ Navigation System:


      1. Disconnect the connector.

        B0025V7

      2. Detach the clamps shown in the illustration.

      3. Remove the bolt and antenna cord sub-assembly.

  6. REMOVE ROOF HEADLINING ASSEMBLY


    1. for Single Cab:

      Click here

    2. for Smart Cab:

      Click here

    3. for Double Cab:

      Click here

  7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. B00261W

      w/o Digital Audio Broadcasting Antenna


      1. Disconnect the connectors.

      2. Detach the clamps and remove the No. 2 antenna cord sub-assembly.

    2. B0028P7

      w/ Digital Audio Broadcasting Antenna


      1. Disconnect the connectors and remove the bolt.

      2. Detach the clamps, guide and remove the No. 2 antenna cord sub-assembly.