CAUTION / NOTICE / HINT
Tech Tips
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
PROCEDURE
CHECK CONNECTION CONDITION
Check that the "iPhone" or "iPod touch" is connected to the head unit using a dedicated cable.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
USE DEDICATED CABLE |
| A |
|
CHECK USAGE CONDITION
Check the conditions under which the Application Link function is being used.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Tech Tips
Some applications have a display restriction in consideration of safe driving.
| A |
|
END |
| B |
|
CHECK "iPhone" OR "iPod touch"
Check if an image is displayed on the "iPhone" or "iPod touch" when an Application Link compatible application is running and the "iPhone" or "iPod touch" is disconnected from the head unit.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Tech Tips
Restarting the "iPhone" or "iPod touch" may return the application operation to normal.
| B |
|
RESTART APPLICATION LINK COMPATIBLE APPLICATION |
| A |
|
CHECK APPLICATION RUNNING STATUS
Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the radio and display receiver assembly with an Application Link compatible application running.
Tech Tips
The Application Link function may not start if a compatible application is not running.
If another application is running on the "iPhone" or "iPod touch", the Application Link compatible application is not running.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Tech Tips
Restarting the "iPhone" or "iPod touch" may return the application operation to normal.
| A |
|
END |
| B |
|
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here |