STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. Click here

   INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Attach the 6 guide pins and 2 screws, and install the steering pad switch assembly.

   2. Install the 2 screws.

   3. Connect the connectors to the spiral cable sub-assembly.

2. Click here

   INSTALL STEERING WHEEL PAD ASSEMBLY

   Click here

3. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. Click here

   CHECK SRS WARNING LIGHT

   for Type A:Click here

   for Type B:Click here

   for Type C:Click here