VANE PUMP(for 2KD-FTV) DISASSEMBLY

CAUTION / NOTICE / HINT

Note


  • When using a vise, place aluminum plates between the part and vise.

  • When using a vise, do not overtighten it.

PROCEDURE


  1. SECURE VANE PUMP ASSEMBLY


    1. B00290FN01

      Using SST, secure the vane pump assembly between aluminum plates in a vise as shown in the illustration.

      SST
      09630-00014

  2. REMOVE POWER STEERING SUCTION PORT UNION


    1. Remove the bolt and power steering suction port union.

    2. Remove the O-ring from the power steering suction port union.

  3. REMOVE FLOW CONTROL VALVE


    1. B0025NH

      Using a 27 mm socket wrench, remove the pressure port union from the front housing.

    2. Using a screwdriver, remove the O-ring from the pressure port union.

    3. Remove the flow control valve from the front housing.

    4. Remove the flow control valve compression spring from the front housing.

  4. REMOVE REAR HOUSING


    1. B0028VT

      Remove the 4 bolts and rear housing.

    2. Remove the O-ring from the rear housing.

  5. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates from the vane pump rotor.

      Note

      Be careful not to drop the vane pump plates.

    2. Remove the vane pump rotor from the front housing.

  6. REMOVE VANE PUMP CAM RING

  7. REMOVE FRONT VANE PUMP SIDE PLATE


    1. B0026VP

      Remove the front vane pump side plate from the front housing.

    2. Remove the O-ring from the side plate.

    3. B0025YS

      Remove the O-ring from the front housing.