PARKING BRAKE CABLE(for 4WD and Pre-Runner) REMOVAL

PROCEDURE

1. Click here

   REMOVE REAR WHEEL

   Click here

2. Click here

   REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

   Click here

3. Click here

   REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY

   Click here

4. Click here

   REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System)

   Click here

5. Click here

   REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

   
   

   1. for Single Cab:

      Click here

6. Click here

   REMOVE FRONT SEAT ASSEMBLY (for Bench Seat Type)

   
   

   1. for Single Cab:

      Click here

7. Click here

   REMOVE REAR SEAT ASSEMBLY

   
   

   1. for Smart Cab (w/ Rear Seat Assembly):

      Click here

   2. for Double Cab:

      
      

      1. for Seat Cushion 60/40 Split Type:

         Click here

      2. for Seat Cushion Bench Type:

         Click here

8. Click here

   REMOVE BACK PANEL TRIM (for Smart Cab)

   Click here

9. Click here

   REMOVE FRONT DOOR SCUFF PLATE LH

   
   

   1. for Single Cab:

      Click here

   2. for Smart Cab:

      Click here

10. Click here

    REMOVE FRONT DOOR SCUFF PLATE RH

    
    

    1. for Single Cab:

       Click here

    2. for Smart Cab:

       Click here

11. Click here

    REMOVE REAR DOOR SCUFF PLATE LH (for Double Cab)

    Click here

12. Click here

    REMOVE REAR DOOR SCUFF PLATE RH (for Double Cab)

    Click here

13. Click here

    DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    
    

    1. for Smart Cab:

       Click here

    2. for Double Cab:

       Click here

14. Click here

    DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

    
    

    1. for Smart Cab:

       Tip:

       Use the same procedure described for the LH side.

    2. for Double Cab:

       Tip:

       Use the same procedure described for the LH side.

15. Click here

    REMOVE LOWER QUARTER TRIM PANEL LH

    
    

    1. for Single Cab:

       Click here

    2. for Smart Cab:

       Click here

    3. for Double Cab:

       Click here

16. Click here

    REMOVE LOWER QUARTER TRIM PANEL RH

    
    

    1. for Single Cab:

       Click here

    2. for Smart Cab:

       Click here

    3. for Double Cab:

       Click here

17. Click here

    REMOVE LUGGAGE COMPARTMENT SIDE COVER LH (for Smart Cab)

    Click here

18. Click here

    REMOVE LUGGAGE COMPARTMENT SIDE COVER RH (for Smart Cab)

    Click here

19. Click here

    REMOVE INTERMEDIATE LEVER PROTECTOR

    
    

    1. Partially remove the floor carpet.

       Tip:

       It is not necessary to fully remove the floor carpet. Partially remove it so that the intermediate lever protector can be removed in a later step.

    2. 

       *A

       for Single Cab

       *B

       except Single Cab

       Remove the 3 bolts and intermediate lever protector with No. 2 console box mounting bracket.

20. Click here

    REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET

    
    
    1. 

       *A

       for Single Cab

       *B

       except Single Cab

       Remove the 2 bolts and No. 2 console box mounting bracket from the intermediate lever protector.

21. Click here

    REMOVE PARKING BRAKE CABLE HEAT INSULATOR

    
    
    1. 

       Remove the 2 bolts and parking brake cable heat insulator.

22. Click here

    REMOVE PROPELLER SHAFT ASSEMBLY

    
    

    1. for TSAM Made:

       Click here

    2. for TMT Made:

       Click here

23. Click here

    REMOVE FUEL TANK

    
    

    1. 1GR-FE:

       Click here

    2. 1KD-FTV:

       Click here

    3. 2KD-FTV:

       Click here

    4. 1GD-FTV:

       Click here

    5. 2GD-FTV:

       Click here

    6. 2TR-FE:

       Click here

    7. 5L-E:

       Click here

24. Click here

    REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

    
    
    1. 

       *1	No. 1 Parking Brake Cable Assembly	*2	No. 2 Parking Brake Cable Assembly
       *3	No. 3 Parking Brake Cable Assembly	*4	Parking Brake Equalizer Sub-assembly
       *5	Cable Support Bracket	-	-

       Remove the 2 bolts (labeled A).

    2. Remove the clip and pin from the No. 3 parking brake cable assembly.

    3. Disconnect the No. 1 parking brake cable assembly from the No. 3 parking brake cable assembly.

    4. Disconnect the No. 1 parking brake cable assembly from the parking brake equalizer sub-assembly.

    5. Disconnect the No. 1 parking brake cable assembly from the cable support bracket.

    6. Remove the No. 1 parking brake cable assembly from inside the vehicle.

    7. Remove the bolt (labeled B) and cable support bracket.

25. Click here

    REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

    
    

    1. Disconnect the No. 2 parking brake cable assembly from the parking brake shoe lever.

       Tip:

       Refer to the procedures up to the removal of the brake shoe.

       Click here

    2. 

       Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.

    3. 

       *1

       No. 2 Parking Brake Cable Assembly

       *2

       Parking Brake Equalizer Sub-assembly

       Disconnect the No. 2 parking brake cable assembly from the parking brake equalizer sub-assembly.

    4. Remove the 4 bolts and No. 2 parking brake cable assembly.

26. Click here

    REMOVE PARKING BRAKE EQUALIZER SUB-ASSEMBLY

    
    
    1. 

       Remove the 2 bolts and parking brake equalizer sub-assembly.

27. Click here

    REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

    
    

    1. Disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever.

       Tip:

       Refer to the procedures up to the removal of the brake shoe.

       Click here

    2. 

       Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.

    3. 

       *1

       No. 3 Parking Brake Cable Assembly

       -

       -

       Remove the clip.

    4. Remove the 3 bolts, nut and No. 3 parking brake cable assembly.