PARKING BRAKE LEVER INSTALLATION

PROCEDURE


  1. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY


    1. A01LCXM

      Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.

    2. A01LBY1

      Temporarily install the adjusting nut to the No. 1 parking brake cable assembly.

    3. A01LAVRE02

      Install the 2 bolts and 2 nuts in the order shown in the illustration.

      Torque:
      14.5 N*m  { 148 kgf*cm, 11 ft.*lbf }
    4. A01LFM3C01
      *a Claw
      B0069FO Return

      Return the claw to its original position.

      Tech Tips

      Move the parking brake lever sub-assembly a few times and check for smooth movement.

    5. A01L81TE01

      Install the 3 bolts in the order shown in the illustration.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    6. Install the lock nut.

      Tech Tips

      Completely tighten the lock nut when adjusting the parking brake lever travel.

  2. INSTALL PARKING BRAKE SWITCH ASSEMBLY

    Click here

  3. ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

  4. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Console Box Lid)

    Click here

  5. INSTALL CONSOLE BOX ASSEMBLY (w/ Console Box Lid)

    Click here