REAR BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner) INSTALLATION

PROCEDURE


  1. INSTALL NO. 5 FLEXIBLE HOSE BRACKET


    1. Connect the No. 5 flexible hose bracket with the 2 bolts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

    2. Install the No. 5 flexible hose bracket with the 3 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

    3. Attach the brake tube clamp to the No. 5 flexible hose bracket.

  2. INSTALL NO. 6 FLEXIBLE HOSE BRACKET


    1. Install the No. 6 flexible hose bracket with the bolt.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  3. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE


    1. Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.

    2. B0068F6C03
      *a Torque Wrench Fulcrum Length

      Using a union nut wrench, connect the rear brake tube flexible hose to the brake tube while holding the rear brake tube flexible hose with a wrench.

      Torque:
      Specified tightening torque
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    3. Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.

    4. B0068F6C03
      *a Torque Wrench Fulcrum Length

      Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

      Torque:
      Specified tightening torque
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

  4. BLEED BRAKE LINE (w/ VSC)

    Click here

  5. BLEED BRAKE LINE (w/o VSC)

    Click here

  6. BLEED CLUTCH LINE (for Manual Transmission)

    Click here