REAR BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner) REMOVAL

PROCEDURE


  1. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  2. REMOVE REAR BRAKE TUBE FLEXIBLE HOSE


    1. A01LA1X

      Using a union nut wrench, disconnect the brake tube from the rear brake tube flexible hose while holding the rear brake tube flexible hose with a wrench.

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    2. Remove the 2 clips.

    3. Remove the rear brake tube flexible hose.

    4. A01LAZ6

      Using a union nut wrench, disconnect the brake tube from the rear brake tube flexible hose while holding the rear brake tube flexible hose with a wrench.

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    5. Remove the 2 clips.

    6. Remove the rear brake tube flexible hose.

  3. REMOVE NO. 6 FLEXIBLE HOSE BRACKET


    1. A01LBD4

      Remove the bolt and No. 6 flexible hose bracket from the rear axle housing.

  4. REMOVE NO. 5 FLEXIBLE HOSE BRACKET


    1. Detach the brake tube clamp from the No. 5 flexible hose bracket.

    2. A01LDHB

      Remove the 3 bolts and No. 5 flexible hose bracket.

    3. A01LCAG

      Remove the 2 bolts and disconnect the No. 5 flexible hose bracket.