VANE PUMP(for 1GD-FTV, 2GD-FTV) INSTALLATION

Click here Click here

PROCEDURE

1. Click here

   INSTALL VANE PUMP ASSEMBLY

   
   

   1. Install the vane pump with the 2 bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

2. Click here

   CONNECT PRESSURE FEED HOSE

   
   

   1. Install a new gasket to the pressure feed tube assembly.

   2. 

      *a

      Stopper

      Install the union bolt and connect the pressure feed tube to the vane pump assembly.

      49 N*m

      500 kgf*cm

      36 ft.*lbf

      Tip:

      Make sure that the stopper of the pressure feed tube touches the front housing.

3. Click here

   CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE

   
   

   1. Connect the oil reservoir to pump hose to the vane pump assembly and slide the hose clip.

   2. Connect the connector to the power steering oil pressure switch.

4. Click here

   INSTALL NO. 4 AIR HOSE

   Click here

5. Click here

   INSTALL FAN AND GENERATOR V BELT

   Click here

6. Click here

   ADD POWER STEERING FLUID

7. Click here

   ADJUST POWER STEERING FLUID

   Click here

8. Click here

   CHECK FOR POWER STEERING FLUID LEAK