REAR BRAKE(for TSAM Made 4WD and Pre-Runner) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT REAR BRAKE SHOE RETURN SPRING


    1. B0025VFN01

      Using SST, remove the rear brake shoe return spring from the front brake shoe and rear brake shoe.

      Note

      Be careful not to damage the rear wheel cylinder boot.

      SST
      09703-30011

  2. DISCONNECT SHOE TENSION SPRING


    1. A01SCTN

      Disconnect the shoe tension spring from the front brake shoe and rear brake shoe.

  3. REMOVE FRONT BRAKE SHOE


    1. B0025AHE01

      Using SST, Remove the 2 shoe hold down spring cups, shoe hold down spring, pin and front brake shoe.

      SST
      09718-00011

  4. REMOVE PARKING BRAKE SHOE STRUT SET LH


    1. Remove the parking brake shoe strut set LH from the rear brake shoe.

      Note

      Do not disassemble the strut set, and be careful not to damage or bend any of the components.

  5. REMOVE REAR BRAKE SHOE


    1. B0028YXN01

      Using SST, remove the 2 shoe hold down spring cups, shoe hold down spring, pin and rear brake shoe.

      SST
      09718-00011
    2. A01W92E

      Using needle-nose pliers, disconnect the No. 3 parking brake cable assembly from the rear brake parking brake shoe lever sub-assembly.

  6. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER LH


    1. Remove the rear brake automatic adjust lever tension spring and rear brake automatic adjust lever LH from the front brake shoe.

  7. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY


    1. A01WA9LC01
      B0069FO Remove in this Direction

      Remove the C-washer and rear brake parking brake shoe lever sub-assembly.

  8. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY LH


    1. A01SCP5

      Using a union nut wrench, disconnect the brake line from the rear brake wheel cylinder assembly LH.

    2. Remove the 2 bolts and rear brake wheel cylinder assembly LH from the backing plate.

  9. REMOVE REAR BRAKE DRUM BLEEDER PLUG CAP

  10. REMOVE REAR BRAKE DRUM BLEEDER PLUG


    1. Remove the rear brake drum bleeder plug from the rear wheel brake cylinder assembly LH.

  11. REMOVE REAR WHEEL CYLINDER KIT


    1. Remove the 2 rear wheel cylinder dust boots from the rear wheel brake cylinder assembly LH.

    2. Remove the 2 rear wheel cylinder pistons.

    3. Remove the rear wheel cylinder cup from each wheel cylinder piston.

    4. Remove the rear brake wheel cylinder compression spring from the rear brake wheel cylinder assembly LH.