FRONT BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

    Click here

  2. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  3. REMOVE FRONT FLEXIBLE HOSE

    A01LBU9

    1. Disconnect the brake line from the front flexible hose with a union nut wrench while holding the front flexible hose with a wrench.

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    2. Remove the 2 clips and front flexible hose.

  4. REMOVE FRONT NO. 1 WHEEL CYLINDER TUBE LH

    A01LFT3

    1. Using a union nut wrench, remove the front No. 1 wheel cylinder tube LH from the disc brake cylinder assembly LH.

      Note


      • Do not bend or damage the front No. 1 wheel cylinder tube LH.

      • Do not allow any foreign matter such as dirt and dust to enter the front No. 1 wheel cylinder tube LH from the connecting points.