REAR BRAKE FLEXIBLE HOSE(for 2WD without ABS) INSTALLATION

PROCEDURE


  1. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE


    1. Attach a new clip to the rear brake tube flexible hose.

    2. Connect the rear brake tube flexible hose to the 3-way.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }
    3. B0068F6C03
      *a Torque Wrench Fulcrum Length

      Using a union nut wrench, connect the flexible hose to the brake tube while holding the flexible hose with a wrench.

      Torque:
      Specified tightening torque
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube and 3-way from the connecting points.

  2. BLEED BRAKE LINE

    Click here

  3. BLEED CLUTCH LINE (for Manual Transmission)

    Click here