NAVIGATION RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NAVIGATION RECEIVER ASSEMBLY


    1. B0025EFC02
      B0069FO Install in this Direction

      Insert the navigation receiver assembly in the direction of the arrow shown in the illustration to install it.

  2. INSTALL NO. 2 RADIO BRACKET


    1. B0025L1

      Install the No. 2 radio bracket to the navigation receiver assembly with the 3 screws.

    2. B002542

      Install the 2 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. B00278J

      Install the No. 1 radio bracket to the navigation receiver assembly with the 3 screws.

    2. B0028OH

      Install the 2 screws.

  4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET


    1. Connect all the connectors.

    2. B0028BOC03
      B0068AS Place Hands Here

      Insert the navigation receiver assembly with bracket to attach the clips on its backside.

      Note

      When inserting the navigation receiver assembly, do not press the knobs on it.

    3. Install the navigation receiver assembly with bracket with the 4 screws.

  5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  6. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  7. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  8. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  9. INSTALL INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)

    Click here

  10. INSTALL AIR INLET DAMPER CONTROL LEVER (for Manual Air Conditioning System)

    Click here

  11. INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)

    Click here

  12. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Cooler System)

    Click here

  13. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Cooler System)

    Click here

  14. INSTALL INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Manual Cooler System)

    Click here

  15. INSTALL AIR INLET DAMPER CONTROL LEVER (for Manual Cooler System)

    Click here

  16. INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Cooler System)

    Click here

  17. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  18. INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

    Click here

  19. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  20. INSTALL STEERING WHEEL ASSEMBLY

    Click here

  21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.