VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL CHECK BALL BODY

    Click here

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. A01LFCGC01
      *1 Pin

      Insert the pin of the manual valve into the hole of the manual valve lever.

    2. A01LAASN01

      Install the transmission valve body assembly with the 19 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
      Bolt Length
      Item Length
      Bolt A 36 mm (1.42 in.)
      Bolt B 25 mm (0.984 in.)

    3. Install the detent spring and detent spring cover with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL TRANSMISSION WIRE

    Click here

  4. PERFORM RESET MEMORY

    Click here