PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the park/neutral position switch connector.

    2. A01LAUI

      Using a screwdriver, bend the tabs of the lock washer.

    3. A01LFVU

      Remove the lock nut and lock washer.

    4. A01LG4E

      Remove the bolt and park/neutral position switch assembly.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.